Timmy66":2765a7rt said:
Can you send a link or a website I can find foraged pistons at because I didn’t have much luck finding them before
AFAIK there aren't any catalog forged pistons available for the Ford 200 six and that includes pistons from other engines that might fit.
The least expensive custom forged piston would be from AutoTec.
They will be a forged 4032 aluminum alloy piston
http://racetecpistons.com/
You get to specify all the piston dimensions, piston pin height, piston dish volume, overbore size and the type of piston rings.
This way the piston is set up for the correct compression ratio for the head's combustion chamber volume and you save on having to do extra maching to the block and head.
I talked to Randy this morning and a set of six flat top pistons is $525 and a set of dish piston is $562.50.
Price includes the .912" piston pins.
If you use the later model big valve, big log 62cc chamber heads you can use flat top pistons.
If your present head has the smaller 52cc chambers you will need the dish pistons.
Your machinst will determine what overbore size piston is needed to clean up the cylinder walls.