Accelerator pump linkage on Holley 1940...need pics please

[wallaka]

OK, I dropped my carb and the accelerator pump linkage came off. I lost the linkage for about two weeks (found it in the drain pan under the engine finally) and I forgot what it looks like when connected.

The flat metal linkage that is a part of the actual pump is bent, and I can't figure out how to make it work. I put the round metal linkage that I lost on there, (goes between the accelerator pump and the choke) and it looks like the throttle shaft has a piece on it that contacts a bump on this linkage and makes the pump squirt?

My shop manual has only the 1904 in there, and it's pretty different. Mine has no SCV or dashpot.

I was meaning to take my camera but forgot it. So I drew a picture in Paint of the linkage.

Kind of like this:

Note: Not to scale.

 

[x21]

I think that's the carb I used to have on my 6, tried looking at pics I had of it, but all are not the right angle to catch how that piece goes in there. So far I got a pic of one in a manual-

http://carburetor-manual.com/images/196 ... lite-1.jpg

and mine own: HERE

I hope that helps, even if a little bit.

 

[Mercury Mike]

If I can find my camera I'll take a picture of it for you tomorrow. That's such an easy carb. =)

 

[wallaka]

Thanks guys...now I at least know I was right about the connection. Now I just have to bend everything so it works.