aluminum radiator fit

[cisco170]

Hello. 2 row champion aluminum rad. Has anyone installed one in a 64 falcon 6 cly auto? Problems? Hoses? Thank you for replys

 

[MPGmustang]

depends if it's made for the car or for a diffeent car, if it's made for the 6cyl 64 falcon, should drop in and bolt up.

 

[cisco170]

The radiator on ebay is for a mustang 6cly I'm looking at it seems to fit appro sizes except the lower outlet is 13/4.my is 11/2????

 

[cisco170]

Rechecked my is 11/4 there's is 13/4

 

[MPGmustang]

looks like it's for a v8 the inlet/outlet's are the same as ours except theirs are bigger.. I have read you can convert them, take some welding, but in end u'd rather find a 20inche wide 71+ mavrik for a 250 grab mikes t-stat housing drop in with only trimming.

I'm actually looking for a 24inch wide rad, as that would be the max I can put in my car. but my current rad is still working... for now

 

[jahearne]

You might be able to use a radiator hose adaptor or a hose from a Maverick or Mustang with a 250 six. I'm using a 302 radiator in my '67 that fits my 250 perfectly using Maverick hoses. The 289 and 302 have lower outlet on different sides.

 

[64 200 ranchero]

i have a 96 nissan altima radiator in my car, it gives me more clearence than the stock radiator, i had to move my horns out of the way and make custom bracketts to get it to fit but, it is way better then stock