Cam recommendations

[4lugnuts]

I am thinking of installing a Clay Smith 274-274-108* hydraulic cam in my 200. I am using an original Classic Inlines head, Yella Terra 1:65 roller rockers and RaceTec pistons.
I have a H-264-8-B, but I would like to get a bit more power in the mid. (and a cool lopey idle) Anyone have any experience with the 274?
Vacuum is not an issue.

 

[chad]

I think we need to finish up w/the OP (author) B4 going ina nother direction.
Could you post this ina separate thread?
In doing so U certainly boost the amount of attention and member focus on ur own Q. U deserve as much !

 

[wsa111]

I am thinking of installing a Clay Smith 274-274-108* hydraulic cam in my 200. I am using an original Classic Inlines head, Yella Terra 1:65 roller rockers and RaceTec pistons.
I have a H-264-8-B, but I would like to get a bit more power in the mid. (and a cool lopey idle) Anyone have any experience with the 274?
Vacuum is not an issue.

I do not like the Clay Smith 274. The 108 L/C will give you a very rough idle. I would go with Schneider or Howard for the best choice. The 274 on a 200 will kill your low end power.