Check this out......its so good its almost wrong

[TCSTEVE]

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... Track=true
Need i say more.......
Im in Adelaide and can help get this on its way so let me know. Steve

 

[Anonymous]

Awesome. I didn't know that these existed . So same story as a 2v..? bolt up to a normal 250?

 

[addo]

It's a conversion from regular log head.

Bit short on head pics with the gasket off.

 

[xdee]

Title should read- It's so wrong it's almost good.

 

[TCSTEVE]

Title should read- It's so wrong it's almost good.

He he now im confused. Its not pretty but i bet it works.
Addo, he listed it as a 4V head from some motorshop or something. Any idea what it is. Before i clicked on the link i hoped for a four valve head for our beloved pre Xflows

 

[aussie7mains]

This is how they made falcon sixes go in the pree 250-2v days although this is a nice job. That head is around 1966-7 so its very old.
A7M

 

[SixFoFalcon]

Those exhaust ports look pretty big. I wonder how well the porting was done, though... isn't it a bit tricky to open them up without messing up the head?

 

[Anonymous]

Bit short on head pics with the gasket off.

Here you go.

What do you think. I was keen, but now i'm not so sure

 

[addo]

Good on the seller for doing it (the pictures) right. Thought he was foxing, yesterday.

If you're local, it's got to be worth $200 at least. Has to be a nicer way for handling the induction on a street driven car. The other criteria would be repairs needed to the extractors.

Look great on a vintage speedway midget!

Cheers, Adam.

 

[MRJLB84D]

if i hadnt spent so much cash on my xflow turbo id consider buying this puppy, new turbo manifold to suit, barry grant 4 barrell and boost the sucker!!!!!!!!! or, is the beer and port talking again...i think it is :roll:

 

[Anonymous]

Well, i've got someone geared up to do my shipping, is anyone here going to bid? No point fighting one another...

I'm thinking a pressure test and a surface regrind - $130, then bolt on with new head bolts ($30). I am being realistic, i don't want to get into it and throw loads of cash at it. Sure, mod it later... but for now i need to know what to bid. Oh, and maybe a carb too - opinions on whether it will fit in an XA without taking tin snips to the bonnet?

 

[TCSTEVE]

555Ron, its come out of a TC Cortina so it should fit no worries, don't know bout the extractors though.