A
Anonymous
Guest
I was hoping I could pick the brains of the forum. I've got a 66 Mustang 200 ci. that has not run in about 4 years. I decided it was time to get her going again and started into the engine. I drained what was once fuel from the gas tank, drained and replaced the oil, replaced the antifreeze, rebuilt the stock 1v carb, changed the fuel filter, and replaced the spark plugs. The motor cranks but will not turn over. I disconnected the fuel line from the carb to verify fuel is flowing. With a flashlight, I pulled the throttle linkage to look for fuel spraying in the carb. I don't see any sprays, but there is a mist of fuel and the throttle plate is coated with fuel. I'm pretty much a beginner mechanic and I was hoping I could get some suggestions on where to go from this point. Any direction is appreciated. Thanks!