michael_cini
Well-known member
I had to pull the head on my 250 engine, so when I pulled out the pushrods I noticed that the top portion of the lifter came out with one of the pushrods. Once I removed the cylinder head I removed the lifter and discovered that the retaining clip on the top of the lifter was missing. I took a look around with a flashlight and do not see it. Can I get another clip and recompress the lifter, or do I have to buy a new set? The cam and lifter are only about 2 years old. They are Clay Smith, bought from Classic Inlines.
Thanks.
Michael
Thanks.
Michael