Rocker assembley (dissembley) UPDATE QUESTION

[pedal2themetal45]

HI alll
I;m trying to get the Rocker assembley and pedalstials off the shaft but they seam to be stuck on.?? Now there isn't anything else holding they assembley and the pedistals on right. just the pins in the ends of the shaft right..
tim

 

[JackFish]

There are a few threads on the subject here. Here's one:
http://fordsix.com/forum/viewtopic.php?t=30194

 

[pedal2themetal45]

THANKS JACK
I was looking for that page but wasn't sure were is was. Maybe it should be moved to the sticky?? as I looked there..
Thanks Again
tim

 

[pedal2themetal45]

Shouldn't the holes that oil the rockers be on top of the shaft??
As I took one of the rockers off I noticed that the oiling hole for the rocker was at the bottom of the shaft? should it be at the top so the oil flows down with graveity??
Tim

 

[simon]

nope.

oil holes must face down, so oil gets fast where it is needed the most.
At top of the shaft you have about zero loads.

No gravity needed; pressure circulation takes care of that

 

[pedal2themetal45]

OK Thanks Simon
Now that I think about thats right the load is on the bottom.
Tim