More updates on the turbo system! Found a local place that sells the stainless pipe and they keep stuff in stock which is nice. So I picked up some 2.5” sch10 for the up pipe. I decided to use a pre made Turbo flange to make things easier and give me some flexibility with the v-band. Mocked everything up and got it all tacked up. Used a runner pipe for the waste gate. I think this will give me good flow to keep the boost in check. I am running a 44mm gate, i know others have used smaller gates but I am planning on running low boost so I think this gate should allow enough exhaust to bypass to keep from boost creeping. If not the up pipe should be easy to remove and modify.
