how much and where can I have one made? what thickness woudl you suggest, I may end up making one out of some steel lying around at our garage if its too costly
Turbo header flange
- Thread starter hasa68mustang
- Start date
Mustang Boy
Well-known member
kirkallen143
Famous Member
hasa68mustang":1xqwq63g said:
Yeah Will he means the header flange, and Tommy 3/8" should suffice. Take your exhaust manifold gasket and flat plate steel, trace it and have it cut or you can do it yourself.
--OR--
Sell the mustang, buy a bronco and you can "j-pipe" to the turbo...Yeah!
Kirk
I am working on it t-bone. I found a connection to a laser/plasma cutting place so hopefully I will know something in a week or two.
turbo_fairlane_200":2t5hju6p said:
will I meant the actualy flange that meets up to the head. P-Dawg lemme know not really in a hurry... well until "it" gets here
I was planning on possbily makign my own by tracing but we'll see. the bronco Idea is kina cool but I would never trade my mustang. I definately cant wait to be able to drive the beast again!I can get a flange for you. A guy hear locally (Tucson) already has the program.
All I need to do is call him and tell him how many! It'll fit the log, Oz, and aluminum head. (some port matching of the flange required for use on the aluminum head due to the port size.
)
I currently have one flange at the house, but it's slated for a new header for Kelly's car.
The last time I ordered them (5 of them) the price was $60 each.
That's for 3/8" mild steel, laser cut.
Let me know.
Will
All I need to do is call him and tell him how many! It'll fit the log, Oz, and aluminum head. (some port matching of the flange required for use on the aluminum head due to the port size.
) I currently have one flange at the house, but it's slated for a new header for Kelly's car.
The last time I ordered them (5 of them) the price was $60 each.
That's for 3/8" mild steel, laser cut.
Let me know.
Will
well if you can get them that cheap I will take two of them!!
Does10s":10mj7h2s said:I can get a flange for you. A guy hear locally (Tucson) already has the program.
All I need to do is call him and tell him how many! It'll fit the log, Oz, and aluminum head. (some port matching of the flange required for use on the aluminum head due to the port size.
I currently have one flange at the house, but it's slated for a new header for Kelly's car.
The last time I ordered them (5 of them) the price was $60 each.
That's for 3/8" mild steel, laser cut.
Let me know.
Will
I asked about a flange 2 months ago..... never got the price $$ answer
8)
Does10s":180rh66c said:I can get a flange for you. A guy hear locally (Tucson) already has the program.
All I need to do is call him and tell him how many! It'll fit the log, Oz, and aluminum head. (some port matching of the flange required for use on the aluminum head due to the port size.
I currently have one flange at the house, but it's slated for a new header for Kelly's car.
The last time I ordered them (5 of them) the price was $60 each.
That's for 3/8" mild steel, laser cut.
Let me know.
Will
Im gonna see if I can find a piece of steel large enough to make a flange, if not Ill be sending you a pm.
Tony,
Check your PM inbox....Here's the PM I sent you.
Sent :: Message
From: Does10s
To: Crosley
Posted: Thu Aug 17, 2006 9:37 am
Subject: Re: header flange
Tony,
Yes the flange will fit an Oz head. It'll even fit the new FSPP aluminum head. Although some header/flange port matching will be required due to the much better ports in the alum. head.
I'll have to confirm the price because the $60 each was about a year ago.
Later,
Will
Now FWIW I didn't confirm the price yet. I'll do that today and post back up.
Will
Does10s":1na8hco8 said:
Sorry ,
I read the PM when I received it.
I should have stated : " never got the confirmed price $$ answer"... you were busy with a fresh engine , parts and combo to dial in.
I may place a newspaper ad to sell the Falcon in january while all the auto auctions run. Then I will sell off the turbo stuff, Oz head & the short block if the car sells.
8)
I've been doing the car thing for 4 decades. I must be tired, the thrill is gone
A
Anonymous
Guest
a laser cut header flange for a 300 can be seen at
http://www.majorvacuumleak.com/300/turbo-flange2.jpg
pic is large, sorry. They ended up costing very little, took 2 of them, just in case.
BR / Muki
http://www.majorvacuumleak.com/300/turbo-flange2.jpg
pic is large, sorry. They ended up costing very little, took 2 of them, just in case.
BR / Muki
I tihnk im sticking with the log for a bit to get it goign at least... hehe I made a new avatar
Mustang Boy
Well-known member
that intercooler is crazy
A
Anonymous
Guest
Mustang Boy":fgtfcb6j said:
will it fit??
: : :Mustang Boy
Well-known member
he told me a week or so ago about it and i asked him the same exact question
Linc's 200":1itbhx62 said:Mustang Boy":1itbhx62 said:
will it fit??
with duct tape and a hammer anything can work
... when i measured a few months ago it looked good ill let you guys know tomorrow
A
Anonymous
Guest
Is that the one that is 24" core width?
I am using the 18" core width....it fits perfect. Can't imagine trying to work with one too much larger.
I am using the 18" core width....it fits perfect. Can't imagine trying to work with one too much larger.
Linc's 200":23kw5viy said:Is that the one that is 24" core width?
I am using the 18" core width....it fits perfect. Can't imagine trying to work with one too much larger.
it certainly is, the core is 12x24x3, overall its 31 or 32 inches... After a quick breakfast im off to go make it fit
lol
