Vavle cover wing bolts

[barishiman]

I'm looking for the wing bolts for my 200, chrome, stainless, whatever as long as they are shiny! I just got done painting my engine and it looks beautiful... tear... Anyways, does anybody know where I can get some?


Andrew

 

[63redtudor]

I just picked mine up at a local auto parts store. Think it was Schucks, though I got them a while ago. I'm not too sure if I have the manufacturer or the P/N, but I can look. When go looking for them make sure you get the ones with the longest shank as you can find. The valve covers for these little sixes seem to be a little bit taller than some of the bent 8s. I originally (from the P/O) had some that were too short & were hitting the valve cover. The ones I ended up using have a little stud that threads into the head & then you install the wing nuts. Also make sure that you some of the spreading washers (I think thats what they're called?) if there isn't any that comes with the wing nut kit. Hope this helps. Take care,
Edwin

 

[65coupei6]

If you want some polished stainless steel allen head valve cover bolts you can have them for FREE. Just PM me with your address.

 

[Asa]

you can't beat that with a big stick!!
hey 65, if you don't jump on it i think i will....

 

[Anonymous]

Mr Gasket carries them.

Later,

Doug

 

[63redtudor]

Andrew, the ones I am using are made by Spectre & the P/N is 5298. These are a 5" T-bar style. I used the valve cover tabs P/N 5324. Take care,
Edwin