air conditioning and header

[Anonymous]

Where are the pics posted of the header install when you have air conditioning. Specifically the aftermarket air conditioning.

I know I need to modify the alternator bracket by adding 1 or 2 inches and redrilling the bolt mounting holes.

I've searched all this site but the posts are getting quite a few in number.

 

[AzCoupe]

Which A/C, stcok or aftermarket?

If aftermarket, where the alt. is over the A/C
http://www.fordsixparts.com/Headers and AC.htm

If stock, seek out Jimbo. IIRC, he made up some drawings of his modified brackets.

 

[Anonymous]

that's the link okay will now modify

 

[Anonymous]

Mike, have you had any problems with not being able to keep the a/c belt tight enough in that configuration. I did and thought I would solve it by going to a double pully, running both belts around a/c and dual pully alt. Still having problems with belt slippage. I think I will try running one around the a/c and another around the alternator, maybe the belt is not catching enough of the a/c pully in that over under configeration.. I have the Sanden compressor, it does a great job cooling, just wondering if it's too hard to pull for some reason.

 

[Anonymous]

Okefenoke,
The rotary Sanden compressors use less HP than the old York & Tecumshe compressors.
Doug