Econoline build

[kagehooligan]

I thought i would share my current build with you guys. Im currently building a 63 econoline pickup with a late model 200 inline six.. currently the motor has been bored 30 over. Im running a clay smith cam, dual roller timing chain, a classic inlines dual outlet header. And i just ordered an HEI distributor. The head is a 78 model 250 head. I have converted mine to a home made tri-power setup. I am running carter YF carbs. Im currently working on an air cleaner to cover the carbs.
i will get some pics posted for you guys as soon as i figure out how to posl them.

 

[bubba22349]

You will need to use a photo hosting site there are a number of free ones. In this link is all the info on how to post pictures. Good luck

 

[kagehooligan]

Here are the pics of my engine. Im still waiting on my new distributor to show up.

 

[kagehooligan]

I will get some more pics ups as soon as i can.

 

[rocklord]

I recommend that you reroute your rubber gas lines, or switch to steel gas lines.
Heat from the header and rubber gas lines don't mix.

Great setup. It should run well.

 

[kagehooligan]

I recommend that you reroute your rubber gas lines, or switch to steel gas lines.
Heat from the header and rubber gas lines don't mix.

Great setup. It should run well.

Those are only temporary....until i get the engine running good. I plan on switching to hard lines

 

[kagehooligan]

Pictured below is the new air cleaner i am working on. I cut out the middle section and split in half. I have the new center section roughed in. Now its time for some welding and grinding.