shreqshack
Well-known member
I pulled the transmission out of my 65 mustang (inline 6) this weekend (I am so proud of myself) to replace the clutch and found oil and sludge inside the bellhousing. I am thinking the rear main seal may need to be replaced? Unless finding oil and sludge in the BH is normal? Thoughts?
Is there any advantage to replacing the rear main seal with the transmission and flywheel off? It sounds like I will need to pull the oil pan too.
If you have any tips for changing out the rear main seal....i would be forever grateful. I am a little anxious about doing it.
Thanks to everyone....you have all been so helpful!!
Is there any advantage to replacing the rear main seal with the transmission and flywheel off? It sounds like I will need to pull the oil pan too.
If you have any tips for changing out the rear main seal....i would be forever grateful. I am a little anxious about doing it.
Thanks to everyone....you have all been so helpful!!