T-5 5speed pilot bushing question.

[Jett's_Pony]

Hi guys
We are getting ready to swap out the C4 auto for a t-5 and I have read that some people have used the 4 and 6 cylinder mustang t-5 5 speed transmissions behind a 200. What pilot bushing did you use. The stock pilot bushing is the same as the V8 and is to big for the 4 and 6 input shaft.
Thanks for any help
Jessica

 

[mustang6]

The special pilot bearing that must be used with the 4 cyl T-5 is NAPA Part number 6202-2RSJ.

 

[Jett's_Pony]

Hey Scott
I went to NAPA and ordered it today. I will drop the C4 on monday and start the swap.
Thanks
Jessica

 

[FrankBoss]

this one didnt fit mine...I will double check it tomorrow but it looks like I will have to take it back....

Is this one a fox bodied mustand 4 speed baring?

Frank

 

[Poney102]

I bought a lot of 10 of them when I did mine so if you want one e-mail me and you can have it for a couple of bucks plus shipping.

Dave