All Small Six T5 swap on 1983 3.3 200

[marquis83]

Got my car running again. Was wondering if any of the gurus here know what pilot bearing, flywheel and clutch work for a t5 swap on an 83 200.
I tried searching and didn't find any results. I have a transmission and v8 bellhousing already. Also got a pedal assembly from a foxbody mustang. From what I understand 4/6 bolts should line up for this.

 

[Jmustang_65]

I used pilot bushing PB50F and flywheel and clutch from modern drivelines.

 

[rocklord]

Modern Driveline has a flywheel with the diameter to fit a SBF bellhousing, and the bolt pattern to fit the 200 crank flange. The 200 has a smaller crank flange than the 250/SBF.