All Small Six Winter Project: Better breathing with a large log

[awasson]

I have often thought two 32/36 mounted like you describe would work really well. It could very well overcome much of the limitation of the log design. And you would get to enjoy the experience of flooring it and feeling the secondary's kick in! A flat top log head will fit a 2100 with machining and adapter mounted and the 32/36 is likely smaller base dimensions. The air cleaner would require some planning.

I was just looking at the log on my C9 head. The area where I would like to mount the carburetors is 2-1/8” (outside dimensions) at it’s most narrow point. I could get aluminum stock that I could machine for the 2V bores and mounting studs. Then I’d bolt and epoxy them to the log.