I've seen a few photos where a Holley 2V was turned 90 degrees to allow usage of the linkage arm that's mounted to the firewall instead of adapting a cable. I could use a lead for someone that sells the Holley adapter that orientates the linkage 90 degrees. Currently have the Weber 38 and it's adapter and prefer the ease of tuning a Holley. Thanks, RodC.
Big Log Holley Adapter
- Thread starter MT63AFX
- Start date
8) if you are using the adapter to bolt the holley to the one barrel opening, you just need to orient it they way you want it to go. i did this with an autolite two barrel on my old 66 falcon. i also changed out the bell crank to a V8 one, its narrower than the six cylinder one, and i used a solid rod to connect the carb with the bell crank. if you are interested in the pics, pm me with your email address and i will send the to you.
