Looks good
There is plenty of sealing surface to work well, but in the pic, another bolt needs to be added on the right at about the same space or closer from the edge as the left lower bolt spot...You have a lot of sealing surface but it needs to be clamped even or it can leak. take a magic marker and draw it on the manifold and you can see what will be best for even clamping force.
Make a gasket using about 1/6'' material and dope it up both sides with permatex #3 , let it sit and soak in, let it dry some, do manifold and bolts too, not so much that it is dripping more like tacky.
Time is your friend, Wait as long as you can before putting in service...Re torque as necessary but do not over torque it.
There is plenty of sealing surface to work well, but in the pic, another bolt needs to be added on the right at about the same space or closer from the edge as the left lower bolt spot...You have a lot of sealing surface but it needs to be clamped even or it can leak. take a magic marker and draw it on the manifold and you can see what will be best for even clamping force.
Make a gasket using about 1/6'' material and dope it up both sides with permatex #3 , let it sit and soak in, let it dry some, do manifold and bolts too, not so much that it is dripping more like tacky.
Time is your friend, Wait as long as you can before putting in service...Re torque as necessary but do not over torque it.