All Small Six Weber 32/36 rough idle

[beanmiester]

I have the linkage in picture #1. I don't see how I can get it to work in general but I think with an adjustable linkage i could use the plate circled in picture #2 since the rod just needs to push up

 

[awasson]

I have the linkage in picture #1. I don't see how I can get it to work in general but I think with an adjustable linkage i could use the plate circled in picture #2 since the rod just needs to push up

Here's a discussion I found that uses parts similar to yours to orient the carb with the bowl in the front and the linkage in the back: https://www.vintage-mustang.com/threads/correct-carb-for-1966-6-cyl-mustang.1160010/

This is a pretty good photo showing the linkage mechanism. His carb is different and uses a manual choke cable but it's similar enough to get the idea of what he's done.

 

[awasson]

Also this one

 

[beanmiester]

It looks like he took that square ish bracket that came on the carb and bent it to make it work?